Welch Allyn Connectivity Server - User Manual - Manual (Page 89)

Directions for Use Specifications 85
Assign Patients page
Locations where tone silenced and vibration
stopped when Suspend button tapped at mobile
devices running Clinician Notifier At all respondent devices, the Acuity Central Station, hallway
message panels and the patient monitor
Suspension period after tapping Suspend button 90 s
Patient alarms that interrupt a 90-second suspend
period Lethal arrhythmia alarms (VTACH, ASYS and VFIB) and apnea
alarms
Behavior when Busy button is tapped Only at the respondent device where Busy was tapped, tone and/
or vibration are silenced and the alarm popup is closed.
If all recipients of the alarm tap Busy, the alarm immediately goes
to devices that accept secondary notification. If all of those
recipients tap Busy, the alarm is immediately broadcast to all
devices in the unit.
If the patient is still in the alarm condition 90 seconds after a
clinician taps Suspend, alarm notification returns to the original
recipients.
Behavior when alarm is broadcast and all
respondents tap Busy Default: alarm is rebroadcast
Period of communication dropout before Network
Disconnected alert appears 30 s
Table 9. WACS AcuityLink option: Clinician Notifier alarm and alert indications
Feature Specification
Table 10. WACS AcuityLink option: Clinician Notifier Assign Patients page
Feature Specification
Length of time patients remain assigned after
logout 2 h
Patients listed
Patients NOT listed
• Connected patients with confirmed patient IDs
• Disconnected patients, only if assigned to the device in
escalation mode
• Discharged patients (from Acuity System)
Patient sort order Devices in broadcast mode list one group of patients.
Devices in escalation mode list two groups of patients, as
follows:
•
Checked patients (assigned to the device)
• Nonchecked patients (not assigned to the device)
Default sort order by room. Additional sort capability by patient
name or patient ID number.