Planning the installation – Wine Guardian Through-the-Wall Wine Cellar Cooling Systems 50Hz (WG25) - Manual User Manual

Page 18

Advertising
background image

18

WARNING

RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT

Modification to the equipment may cause injury or damage

to the equipment

.

DANGER

This equipment is heavy. Place the unit on the floor or on a level and stable

surface that can support the full weight of the unit.

Do not modify the equipment, it may cause damage to the equipment and

voids the warranty.

Never place anything on top of the unit.

Never block or cover any of the openings or outlets to the unit.

Never allow anything to rest on or roll over the power cord.

Never place the unit where the power cord is subject to wear or abuse.

Do not use extension cords.

Never overload wall outlets.

Do not remove or open any cover unless the unit is turned off and the power

cord is plugged in.

Use only dedicated power outlet boxes of the correct capacity and

configuration for the unit model.

CAUTION

RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT

Improper installation may result in the equipment malfunctioning and a safety hazard. Read

all of the installation instructions before installing the Wine Guardian unit

Planning the Installation

Tools required


Drill/Phillips head Level Stud finder Tape measure Square Drywall screws

Urethane caulk Hand saw Drywall saw Heavy duty

s

nap knife

Advertising
This manual is related to the following products: