Wine Guardian Through-the-Wall Wine Cellar Cooling Systems 50Hz (WG25) - Manual - Manual (Page 8)

8
Wine Guardian Controls
Main Control: Performs all switching
functions and interfaces with inputs and
outputs. It can connect to local or remote
user interface, as well as remote
temperature/humidity sensor.
Two way communications : local
user interface reports settings back
to main control, main control
energizes outputs and reports alarms
and temp/humidity readings to local
user interface.
Two way communications: remote
user interface reports settings back
to main control, main control
energizes outputs and reports
alarms and temp/humidity
readings to remote user interface.
One way communication: remote
temp/humidity sensor reports temp and
humidity readings to main control.
Local User Interface: Can be used with
Main Control for adjusting settings,
reading temp/humidity, and reading
fault codes at the unit.
Remote User Interface: Can be with
Main Control for adjusting settings,
reading temp/humidity, and reading
fault codes in a remote location away
from the unit.
Temperature/Humidity Sensor: Can be
used in conjunction with the Main
Control to report temp/humidity from
inside the wine cellar without requiring
a user interface to be located inside the
wine cellar.