Talkaphone VOIP-600H Single Button Help IP Call Station - Manual (Page 59)

VOIP-600 Series Phone
Configuration / Operation Manual
Page 59 of 94 Rev. 9/17/2014
Copyright 2014 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.11.9. Reset to Defaults
The Reset to Defaults page allows the phone configuration parameters to be set to their default values. It also
provides an option to retain the IP address and/or the username and password.
Login → Maintenance → Reset to Defaults
Figure 31 Reset to Defaults
To reset to defaults:
1. Select Network IP Address, if the IP address of the phone needs to be retained. If this option is not
selected the IP address of the phone will default to 192.168.1.10.
2. Select Username and Password if the Web Interface credentials need to be retained. If the option is
not selected the username will default to admin and the password will default to admin@123.
3. Select SIP if the SIP settings need to be retained. If this option is not selected the SIP Settings will be
deleted.
4. Click Apply. The phone automatically reboots with the default settings.
4
3
1
2
3