Talkaphone VOIP-600H Single Button Help IP Call Station - Manual (Page 88)

VOIP-600 Series Phone
Configuration / Operation Manual
Page 88 of 94 Rev. 9/17/2014
Copyright 2014 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
VM4StopOnLocalKeyCode = Disable
VM5PlayOnRemoteKeyCode = Disable
VM5PlayOnLocalKeyCode = Disable
VM5StopOnRemoteKeyCode = Disable
VM5StopOnLocalKeyCode = Disable
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VM1PlayToUserInLoop
++
++ Description : The VM #1 will be played to the user in loop
++
++ Valid values : 0 - 1
++ 0- Disable, the VM play in loop
++ 1- Enable, the VM play in loop
++
++ VM1PlayToUserInLoop = 0 (Default value)
++
++ Note : Admin can similarly program values for VM #2 to VM #5
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VM1PlayToUserInLoop = 0
VM2PlayToUserInLoop = 0
VM3PlayToUserInLoop = 0
VM4PlayToUserInLoop = 0
VM5PlayToUserInLoop = 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VMActionOnBut1CallInitRemote, VMActionOnBut2CallInitRemote
++
++ Description : Configured VM will be played to the guard upon call
++ initiation by the specified button
++
++ Valid values : 1 - 5,Disable
++ Disable - Disable the field
++ 1 - 5 Specifies the number of the VM to be played to the
++ user.
++
++ VMActionOnBut1CallInitRemote = Disable (Default value)
++
++Filed name
: VMActionOnAuxIn1ActRemote, VMActionOnAuxIn2ActRemote,
VMActionOnAuxIn3ActRemote
++
VMActionOnAuxIn1DeActRemote, VMActionOnAuxIn2DeActRemote,
VMActionOnAuxIn3DeActRemote
++Valid Value
: Disable , 1-10
++ : 1-5 (for playing of voice message #1 to #5
++ : 6-10 (for stop of voice message play #1 to #5
++ Field name : VMActionOnOutboundCallsAns
++
++ Description : The specified VM will be played to the guard, once the call
++ is being answered by the the guard.
++
++ Valid values : Disable 1 - 5
++ Disable - Diable the option of playing the VM