Talkaphone VOIP-600H Single Button Help IP Call Station - Manual (Page 89)

VOIP-600 Series Phone
Configuration / Operation Manual
Page 89 of 94 Rev. 9/17/2014
Copyright 2014 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
++ 1 - 5 Specifies the number of the VM which needs to be
++ played to the guard phone, when the call is being
++ answered by guard.
++
++ VMActionOnOutboundCallsAns = Disable (Default value)
++
++ Field name : VM1PlayToGuardOnRemoteKeyCode, VM1StopToGuardOnRemoteKeyCode
++
++ Description : The VM #1 will be played/stopped to the guard, once the
++ configured key is dialed by the the guard.
++
++ Valid values : Disable, Combination of 0-9,*,# with maximum of 4 characters
++ Disable - Disable the field
++ *12# - can be used to either start or stop VM #1 play to
++ guard when dialed from the remote side.
++
++ VM1PlayToGuardOnRemoteKeyCode = Disable (Default value)
++ VM1StopToGuardOnRemoteKeyCode = Disable (Default value)
++
++ Note : Admin can similarly program values for VM2 to VM5.
++ Avoid using the same keycode for start and stop of the same
++ VM.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VMActionOnAuxIn1ActRemote = Disable
VMActionOnAuxIn2ActRemote = Disable
VMActionOnAuxIn3ActRemote = Disable
VMActionOnAuxIn1DeActRemote = Disable
VMActionOnAuxIn2DeActRemote = Disable
VMActionOnAuxIn3DeActRemote = Disable
VMActionOnHandsetOffhookRemote = Disable
VMActionOnBut1CallInitRemote = Disable
VMActionOnBut2CallInitRemote = Disable
VMActionOnBut3CallInitRemote = Disable
VMActionOnBut4CallInitRemote = Disable
VMActionOnOutboundCallsAns = Disable
VM1PlayToGuardOnRemoteKeyCode = Disable
VM1StopToGuardOnRemoteKeyCode= Disable
VM2PlayToGuardOnRemoteKeyCode = Disable
VM2StopToGuardOnRemoteKeyCode= Disable
VM3PlayToGuardOnRemoteKeyCode = Disable
VM3StopToGuardOnRemoteKeyCode= Disable
VM4PlayToGuardOnRemoteKeyCode = Disable
VM4StopToGuardOnRemoteKeyCode= Disable
VM5PlayToGuardOnRemoteKeyCode = Disable
VM5StopToGuardOnRemoteKeyCode= Disable
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VM1PlayToGuardInLoop
++
++ Description : The VM #1 will be played to the guard in loop
++
++ Valid values : 0 - 1
++ 0- Disable, the VM play in loop
++ 1- Enable, the VM play in loop