Talkaphone VOIP-600H Single Button Help IP Call Station - Manual (Page 86)

VOIP-600 Series Phone
Configuration / Operation Manual
Page 86 of 94 Rev. 9/17/2014
Copyright 2014 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
AuxOp2DeActOnAuxIn1Act = 0
AuxOp2DeActOnAuxIn2Act = 0
AuxOp2DeActOnAuxIn3Act = 0
AuxOp2DeActOnAuxIn1DeAct = 0
AuxOp2DeActOnAuxIn2DeAct = 0
AuxOp2DeActOnAuxIn3DeAct = 0
AuxOp3DeActOnAuxIn1Act = 0
AuxOp3DeActOnAuxIn2Act = 0
AuxOp3DeActOnAuxIn3Act = 0
AuxOp3DeActOnAuxIn1DeAct = 0
AuxOp3DeActOnAuxIn2DeAct = 0
AuxOp3DeActOnAuxIn3DeAct = 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : VMActionOnBut1CallInit, VMActionOnBut2CallInit ,
++ VMActionOnInboundCallsAns, VMActionOnAuxIn1Act,
++ VMActionOnAuxIn2Act & VMActionOnAuxIn3Act
++
++ Description : Configured VM will be played to the user upon call
++ initiation by the specified button
++
++ Valid values : 1 - 5,Disable
++ Disable - Disable the field
++ 1 - 5 Specifies the number of the VM to be played to the
++ user.
++
++ VMActionOnBut1CallInit = Disable (Default value)
++
++ Field name : VMActionOnInboundCallsAns
++
++ Description : Configuring the specified VM to start playing or stop
++ playing when the inbound calls are answered.
++
++ Valid values : 1 - 10, Disable
++ Disable - Disable the field
++ 1 - 5 Specifies the number of the VM to be played to the user.
++ 6 - Stops the VM #1(if playing)
++ 7 - Stops the VM #2(if playing).Similarly the values 8 to 10
++ can be configured to stop the VM #3 TO VM #5
++
++ Note : Admin can similarly program values for VMActionOnAuxIn1Act,
++ VMActionOnAuxIn2Act & VMActionOnAuxIn3Act on the guidelines
++ for the VMActionOnInboundCallsAns
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VMActionOnInboundCallsAns= Disable
VMActionOnAuxIn1Act = Disable
VMActionOnAuxIn2Act = Disable
VMActionOnAuxIn3Act = Disable
VMActionOnAuxIn1DeAct = Disable