Talkaphone VOIP-600H Single Button Help IP Call Station - Manual (Page 80)

VOIP-600 Series Phone
Configuration / Operation Manual
Page 80 of 94 Rev. 9/17/2014
Copyright 2014 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : Button2Type
++ Description : Type of Button.
++ Valid values : Button2Type = 1 - As AutoDial
++ Button2Type = 2 - As Hookswitch (Default Value)
++
++ Field name : Button2CallList
++ Field name : Button2CallPriority
++ Field name : Button2CallNetworkPriority
++ Description : Required when Button programmed as AutoDial.
++ Description : Required when Button programmed as AutoDial.
++ Valid values : Button2CallPriority : 2 - 10 , 2 (default value)
++ Button2CallNetworkPriority: 1 - 63. 46 (Default value)
++ Note : This field is only valid for phones having more than 1
++ buttons.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Button2Type = 1
Button2CallList = 1
Button2CallPriority = 2
Button2CallNetworkPriority = 46
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : Button3Type
++ Description : Type of Button.
++ Valid values : Button3Type = 1 - As AutoDial
++ Button3Type = 2 - As Hookswitch (Default Value)
++
++ Field name : Button3CallList
++ Field name : Button3CallPriority
++ Field name : Button3CallNetworkPriority
++ Description : Required when Button programmed as AutoDial.
++ Description : Required when Button programmed as AutoDial.
++ Valid values : Button3CallPriority : 2 - 10 , 2 (default value)
++ Button3CallNetworkPriority: 1 - 63. 46 (Default value)
++ Note : This field is only valid for phones having more than 1
++ buttons.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Button3Type = 5
Button3CallList = 1
Button3CallPriority = 0
Button3CallNetworkPriority = 0
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Field name : Button4Type
++ Description : Type of Button.
++ Valid values : Button4Type = 1 - As AutoDial
++ Button4Type = 2 - As Hookswitch (Default Value)
++
++ Field name : Button4CallList
++ Field name : Button4CallPriority
++ Field name : Button4CallNetworkPriority
++ Description : Required when Button programmed as AutoDial.