BendixKing SKYMAP IIIC - Manual (Page 106)

SETUP SCREENS
Personal Identification Number (PIN) Setup
Screen 24: PIN Setup Cover Screen
We have provided the security feature of a Personal Identification Number (PIN) in your
Bendix/King unit with the main aim of preventing unauthorised persons from using your
navigation equipment. You may use this screen to set up your own choice of a four-digit
personal number. This can be any permutation of the figures 1, 2, 3, and 4, e.g. 4412,
2433, 3124 etc.
To access Screen 24, Pin Setup Cover Screen, press Key 4, SETUP, in Main Menu
followed by Key 4, PIN SETUP, in Screen 21, Setup Cover Screen. On entry to this
Screen you will find the cursor positioned over the first of four question marks. The
joystick is not active and the current four-digit PIN must be entered by pressing Keys 2, 3,
4, and 5 (now labelled 1, 2, 3 and 4 as in the illustration above). The default PIN number
that will be set when you receive the unit is 1234. As you enter each number by pressing
each of the relevant keys once, in the order that matches the PIN, each question mark in
turn is replaced by an asterisk and the cursor moves one step to the right. When the last
digit is entered, if you have failed to enter the correct four digits, Screen 25 (see illustration
below) will be displayed.
APPE
NDICES
Rev 9 Jul 2006 A-9 Skymap/Tracker IIIC Pilot's Guide