BendixKing SKYMAP IIIC - Manual (Page 114)

SETUP SCREENS
Data In/Out
Screen 35: Data Input/Output Setup and Test Screen
On entry to this Screen details of the current settings for data output and GPS Source are
displayed in the top box. Settings can be toggled by using the joystick and the options
available are as follows. (The default settings are listed first.)
Tracker IIIC: DATA OUTPUT: OFF / ECHO INPUT.
Skymap IIIC:
DATA OUTPUT: OFF / RS232 (ARNAV) 9600 BAUD / NMEA 0183
4800 BAUD / AVIONICS INTERFACE.
The GPS SOURCE allows you to use your Skymap IIIC as a Tracker IIIC. When you move
the cursor to the right of this field the following warning / confirmation request is displayed:
APPE
NDICES
Screen 35B: GPS Source Change Warning Screen
If you press ABORT the GPS source remains unchanged. If you press YES, you can use the
joystick to toggle the GPS SOURCE between INTERNAL and EXTERNAL. When set to
INTERNAL, the internal GPS receiver will be used, and key 3 will be displayed, to allow
access to the GPS Status screen. When set to EXTERNAL, the Skymap IIIC will enter
Tracker Mode and use data generated by an external GPS receiver in the same way as a
Rev 9 Jul 2006 A-17 Skymap/Tracker IIIC Pilot's Guide