BendixKing SKYMAP IIIC - Manual (Page 107)

SETUP SCREENS
Screen 25: PIN Incorrect Screen
If you get this PIN INCORRECT message, just press Key 1 PREV PAGE and you go back
to Screen 24 where you can make another attempt to enter the correct PIN. Unlike many
bank Automatic Teller Machines, there is no limit to the number of attempts you can make
to input the correct PIN to your Bendix/King unit. Should you have the misfortune to forget
your number, keep trying; there are only 256 permutations!
A
P
P
E
N
D
IC
E
S
Screen 26: PIN Change & Power-On Lock Enable Screen
If you have entered the correct PIN then you move straight to Screen 26 as illustrated
above. On entry to this Screen, the current PIN and the status of the AUTO POWER-ON
LOCK are displayed. The default selection for this is DISABLED. If you wish to activate
this power-on lock, pressing Key 3, AUTO LOCK, will change the setting to ENABLED.
Pressing Key 1 returns you to Screen 21, the Main Setup page.
Pressing Key 2 takes you into Screen 27 (see below) where you are able to change the
PIN.
Rev 9 Jul 2006 A-10 Skymap/Tracker IIIC Pilot's Guide