BendixKing SKYMAP IIIC - Manual (Page 99)

SETUP SCREENS
Screen 22: Map Customisation Screen
To access Screen 22, Map Customisation Screen, presses Key 4, SETUP, in Main Menu,
followed by Key 2, MAP SETUP, in Screen 21, Setup Cover Screen.
When this Screen first appears you will always see the current settings with a cursor over
the words ORIENTATION. You can then use the joystick to move the cursor up and down
the list of headings. When the cursor is over the heading you wish to alter, move the
joystick to the right. This will in turn move the cursor over to the set of options available for
that heading. Moving the joystick up and down will then allow you to scroll through these
options.
The various settings available for each heading are listed below. The default settings are
those shown in the illustration above. To reset the values on this Screen (or Screens 22A,
22B and 22C) to their defaults, press Key 3 RESET VALUES. This will reset the values on
the displayed screen only. In order to reset all user defined data globally, see the Clear
Memory screens later in this section.
Settings available:
ORIENTATION: track up / north up.
A
P
P
E
N
D
IC
E
S
AIRPORT NAMES: ICAO code / Airport name / City name.
MAP UNITS: nautical miles / statute miles / kilometres.
COORD SYSTEM: LAT/LON / OSGB / UTM.
DISPLAY: landscape standard / landscape inverse / portrait standard / portrait inverse
LANGUAGE: English / French / German / Spanish.
MIN R/W LENGTH: selectable from 0 to 15 000.
R/W SURFACE REQUIRED: hard/soft / hard.
EXTENDED TRACK: on / off.
AUTO ZOOM: off / on.
AUTO DECLUTTER: on / off
KEY BEEP: on / off.
LOGGING RATE: selectable between 000 (off) and 999 secs.
POSITION REF: all data / VOR’s / VOR’s & Airports
AIRSPACE ALERT: on / off
ORIENTATION: This allows you to choose whether to have the map displayed with north
at the top of the screen or orientated to have the aircraft's track aligned up the screen.
Rev 9 Jul 2006 A-2 Skymap/Tracker IIIC Pilot's Guide