BendixKing SKYMAP IIIC - Manual (Page 44)

DETAILED OPERATION
SECTION 3 DETAILED OPERATION SECTION 3 DETAILED OPERATION
TITLE AND HELP SCREENS TITLE AND HELP SCREENS
To switch the unit on, rotate the On/Off/Brightness control fully clockwise. To switch the unit on, rotate the On/Off/Brightness control fully clockwise.
Your unit produces a variety of tones and alarms to assist you in correct operation. At this
stage only two types of tone are relevant. These are:
Your unit produces a variety of tones and alarms to assist you in correct operation. At this
stage only two types of tone are relevant. These are:
• One short beep sounds when you press a valid key. • One short beep sounds when you press a valid key.
• Two short beeps sound when you press a key that is not assigned.
• Two short beeps sound when you press a key that is not assigned.
In the following screen images the numbers shown adjacent to the key positions indicate
the screen number activated when that key is pressed.
In the following screen images the numbers shown adjacent to the key positions indicate
the screen number activated when that key is pressed.
D
E
T
A
IL
E
D
O
P
E
R
A
T
IO
N
IL
E
D
O
P
E
R
A
T
IO
N
Screen 1: Title Screen Screen 1: Title Screen
The Title Screen appears each time the unit is switched on, after the Jeppesen ® database
expiry date has been acknowledged.
The Title Screen appears each time the unit is switched on, after the Jeppesen ® database
expiry date has been acknowledged.
Key 1 calls Screen 2, which is the Main Menu Screen. Key 1 calls Screen 2, which is the Main Menu Screen.
Key 2 calls Screen 7, which is the Flight Planning Mode Cover Screen.
Key 2 calls Screen 7, which is the Flight Planning Mode Cover Screen.
Key 3 calls Screen 20, which is the Demo Mode Setup Screen. (If, since being
switched on, the unit has received valid fix information from the internal GPS
receiver (Skymap IIIC) or from an external device (Tracker IIIC), Key 3 DEMO
MODE will for safety reasons be blanked and disabled.) This is the only Screen
on which Demo Mode can be activated.
Key 3 calls Screen 20, which is the Demo Mode Setup Screen. (If, since being
switched on, the unit has received valid fix information from the internal GPS
receiver (Skymap IIIC) or from an external device (Tracker IIIC), Key 3 DEMO
MODE will for safety reasons be blanked and disabled.) This is the only Screen
on which Demo Mode can be activated.
Key 4 calls Screen 21, which is the Setup Cover Screen. Key 4 calls Screen 21, which is the Setup Cover Screen.
Key 5 calls Screen 38, which is the Map Mode Screen.
Key 5 calls Screen 38, which is the Map Mode Screen.
To switch the unit off, rotate the On/Off/Brightness control fully counter clockwise. To switch the unit off, rotate the On/Off/Brightness control fully counter clockwise.
WARNING: Do not force the control knob past its end stops.
Rev 9 Jul 2006 3-1 Skymap/Tracker IIIC Pilot's Guide