BendixKing SKYMAP IIIC - Manual (Page 26)

BASIC OPERATION
BASIC OPE
RATION
The data presented across the data output pins is controlled by the settings on Screen 35,
Data Input/Output Setup and Test Screen. If you want to connect an external audio
annunciator to your unit, do so in accordance with the following drawing and activate it’s
operation on Screen 23, NAV Mode Customisation Screen by setting EXTERNAL ALARM
to ON.
If you are not planning to connect either the green or yellow cores, please cut them back
and insulate the cut end. Please do not make connection to pins 3, 6 or 7.
Rev 9 Jul 2006 1-17 Skymap/Tracker IIIC Pilot's Guide