BendixKing SKYMAP IIIC - Manual (Page 121)

WARNING SCREENS
search through the relevant part of the new memory card looking for a name match. If a
perfect match is found for the Name, then the Lat. and Long are then checked and if they
match correctly also, then no action is required and the software goes on to check the next
item.
If a discrepancy is found in either Lat. or Long, Screen 56 will appear showing the new
information for the waypoint in question. You must confirm that you are aware of the
change by pressing Key 1.
If no match can be found for the name (i.e. the name has been changed or the item has
been deleted from the new database) the Lat. and Long fields on Screen 56 will be left
blank and the bottom section of the box will read:
CHANGING DATABASE REFERENCE
PLEASE CONFIRM
Pressing Key 1 will change the database reference displayed on Screen 12, Flight Plan
Program/Edit Screen, to OW indicating that this item is now an Old Waypoint and is no
longer accessible from any database.
This check is carried out for every point in every flight plan and whenever discrepancies
are found, Screen 56 will appear on each occasion.
APPE
NDICES
Rev 9 Jul 2006 B-4 Skymap/Tracker IIIC Pilot's Guide