BendixKing SKYMAP IIIC - Manual (Page 81)

DETAILED OPERATION
Screen 46: Beacon Information Screen
The Screen above shows the additional information about the beacon chosen on Screen
45, Ten Nearest Beacons.
From here by pressing Key 2 you will get back to MAP mode (Screen 38 or 47). To select
another beacon from the Ten Nearest (Screen 45) you press Key 1. If you press Key 3,
IDENT, the unit will mimic the Morse code ident for the chosen beacon on the internal
beeper (and on the external alarm if you switched this on in Screen 23, NAV Mode
Customisation Screen).
DETAILE
D
OPE
RATION
If you want to view the area immediately around the chosen beacon, press Key 4. This will
call Screen 10A which is very similar to screen 10, the View and Edit User Waypoint on
the Map Screen. Screen 10A can be cancelled by pressing Key 1, PREV PAGE.
To obtain a DIRECT TO for the chosen beacon all you have to do is press Key 5, labelled
DIRECT TO, and you will switch back to (Screen 47) MAP mode with the selected
DIRECT TO activated.
Rev 9 Jul 2006 3-38 Skymap/Tracker IIIC Pilot's Guide