CANOGA PERKINS 9145ELB Network Interface Device Hardware - Manual (Page 16)

9145ELB NID Hardware User’s Manual Introduction
Terminology
2
• DC Power Supply: 36 VDC to 72 VDC, 120W
1.2.4 Regulatory Compliance
• ETL, cETL (UL 60950, CAN/CSA C22.2 No. 60950) EN 60950
• EN 60825-1, IEC 60825-1
• EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 (Pending)
• FCC Part 15B, Class A, ICES-003 Class A
• C-Tick (AS/NZS 3548)
• NEBS Level 3 (Pending)
• CE Mark (Pending)
1.2.5 Mounting Options
• 19-Inch or 23-Inch single-unit rack mount
• Table Top
See Chapter 3, “Installation” on page 13 , for installation procedures.
1.2.6 Rack Mounting
Customers must order the brackets required () for their particular rack installation.
For rack mounting installation instructions, see “Rack Mounting” on page 14 .
1.3 Terminology
The following terms and acronyms are used in this manual.
Term Description
BIDI Bidirectional SFP
CEN Carrier Ethernet Network
CFM Connectivity Fault Management
CoS Class of Service
CRC Cyclic Redundancy Check
FPGA Field Programmable Gate Array
LAG Link Aggregation Group
LCAS Link Capacity Adjustment Scheme
MEN Metro Ethernet Network
MP Maintenance Point