CANOGA PERKINS 9145ELB Network Interface Device Hardware - Manual (Page 21)

Functional Description 9145ELB NID Hardware User’s Manual
Front Panel
7
• One Ethernet Management port with RJ45 connectors. See the section “Ethernet Man-
agement Port” on page 8.
• One console port with 8-pin modular connector. See the section “Console Port and Man-
agement Interface” on page 8.
• Two hot wappable power supply slots. See the section “Powering” on page 11.
• A hot swappable fan module slot. See the section “Fan Module” on page 10.
• Power and status LEDs. See the section “LED Indicators” on page 23 .
• Reset button. See the section “Reset Button” on page 12.
Figure 2-4 Front Panel
2.2.1 User Ports
The sixteen 9145ELB User Ports are shown in Figure 2-4 .
• RJ45 connectors are IEEE 802.3 compliant for 10/100/1000BASE-T.
• RJ45 connectors support MDI and MDIX connections.
• RJ45 connectors support both full-duplex and half-duplex operation in 10/100/1000 Mbps
mode.
• SFP modules support full-duplex operation at 100/1000 Mbps.