5 installing the fan module, Installing the fan module – CANOGA PERKINS 9145ELB Network Interface Device Hardware User Manual
Page 30
Advertising
9145ELB NID Hardware User’s Manual
Installation
Installing the Fan Module
16
Figure 3-3 SFP Modules
3.5 Installing the Fan Module
Follow these steps to install the fan module (
):
1. Remove the fan module from its packaging.
2. Carefully insert the replacement fan module into the slot, being sure to align the module
so it slides along the guide rails and mates securely with the backplane.
3. Screw in the thumb screw to secure the fan module to the enclosure.
Figure 3-4 Fan Module - Front View
Advertising