Setting the message alert, Setting the recording time alert – Panasonic KX-F700 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Instructions
Setting the message alert
When this feature is on, the unit will let you know with a slow beep if a caller’s message has been recorded
in the common memory.
Press MENU.
1.SYSTEM SET UP
Press #42.
MESSAGE ALERT
Press START/SET.
MODE=OFF
[ A V ]
Press
A
or
T
to select
“ON”.
—If this feature is not
required, select “OFF’
Press START/SET to
store the setting.
Press MENU to end the
program.
Note:
• The feature does not work when an incoming message is recorded in the mailbox.
Setting the recording time alert
With this feature, when the remaining time to record incoming messages becomes less than 60 seconds,
the unit will alert the user with a slow beep.
Press MENU.
1.SYSTEM SET UP
Press #43.
REC. TIME ALERT
Press START/SET.
MODE=OFF
[ A T
REDIAUPAUSE
▼
Press
A
or ▼ to select
“ON”.
—If this feature is not
required, select “OFF’
Press START/SET to
store the setting.
Press MENU to end the
program.
31