Setting the date and time, Setting your iogo, Setting the date and time setting your logo – Panasonic KX-F700 User Manual
Page 36: Ж) ® cd
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Settings
Setting the date and time
The internal clock of the unit will print the date and time, on the top line of all fax messages you transmit,
and on the fax communication reports such as the journal report and the transmission report.
( )
menu
Press MENU.
1.SYSTEM SET UP
(Ж) ® CD
Press #01.
SET DATE
S
l
time
О
START/SET
О
Press START/SET.
01/01/94 12:00A
ФФФ
CpCp®
©C
a
)C1)
Enter the current
month/day/year/hour/
minute by selecting each
2 digits. Then press *
for AM or press # for PM.
Example:
Aug. 10 1994, 3:00 PM
Press 08 10 94 03 00,
then press # to select
PM.
Press START/SET to
store the setting.
Press MENU to end the
program.
Notes:
•
When you make a mistake while programming, press the STOP button, then make the correction.
• The accuracy of the clock will be approximately ± 45 seconds a month at room temperature.
Setting your iogo
The logo is used to identify fax messages that are being transmitted by your unit. It may consist of
alpha-numeric letters and symbols. Usually the logo is a company, division or personal name in an
abbreviated form.
C )
menu
Press MENU.
1.SYSTEM SET UP
с ю с ю с ю
Press #02.
YOUR LOGO
0
START/SET
О
Press START/SET.
LOGO =
ФФФ
ФФФ
Ффсю
сю®сю
START/SET
О
©
с )
menu
Enter your logo up to
30 characters by
following the instructions
on page 34.
Press START/SET to
store the setting.
Press MENU to end the
program.
Note:
• When the first character is entered, the preset logo will be cleared.
36