Panasonic KX-F700 - Manual (Page 62)

Advanced Instructions
Re-recording a greeting message
You can change the content of the greeting message from a remote location.
O Call your unit.
□ ®(fl
® Id®
4
® d@
4^
PRS
7
WXY
9
{Your phone
number)
{Remote ANS ID)
or
{Your mailbox no.
and the password)
0 ■ For the common greeting message:
Dial your remote ANS ID while the greeting
message is playing.
■ For the mailbox greeting message:
Press * and 1, 2 or 3 (desired mailbox no.).
Then enter the mailbox password.
o Press 7 to start re-recording after hearing a
beep.
—A long beep will sound.
O After hearing a long beep, speak clearly and
loudly for up to 16 seconds.
—If you pause for over 2 seconds while
recording, the unit will beep and stop the
greeting message recording. In this event,
repeat from step 2 within 10 seconds.
0 When finished, press 9.
—The new greeting message will be played
back to confirm the content.
Turning on/off pager aiert
You can remotely turn on/off a pager alert feature which has been programmed with a pager number in
advance (see page 63).
O Call your unit.
0 For the common pager alert, press the remote ANS ID.
or
For a mailbox pager alert, press * and the mailbox number (1,2 or 3),
then press the mailbox password.
© To turn on the pager alert, press 81.
To turn off the pager alert, press 82.
To skip the greeting message
Callers can record their messages without listening to the greeting message.
They may call your unit, then dial 0 during the greeting message playback.
—The unit will skip the rest of the greeting message and start recording.