Panasonic KX-F700 - Manual (Page 42)

Advanced Instructions
Delayed Transmission
Using a built-in clock, this unit can send documents automatically at a specific time. This allows you to take
advantage of low-cost calling hours given by some telephone companies.
The delayed transmission can be reserved to take place up to 24 hours.
o
REDIAUPAUSE
(Z3 ▼
Insert the documents
FACE DOWN.
Press MENU.
1.SYSTEM SET UP
Press #25.
DELAYED XMT
Press START/SET.
MODE=OFF A T
Press A or T to select
“ON”.
MODE=ON A T ]
—If this feature is not
required, select “OFF".
Press START/SET.
N0.=
©
CD CD CD cpcpcp
CDCj)CD
CD®®
CD CD®
CD CD CD
CD CD CD
®(D®
Enter the phone number
using one-touch dialing,
speed dialing or a full
number.
—You can use the
electronic telephone
directory (see
page 40).
Press START/SET to
store the number.
TIME=12:00AM
Enter the transmission
start time.
Example: 11:00PM
Press 1100, then press #
to select PM.
—To select AM, press -X-.
Press START/SET to
store the setting.
Press MENU to end the
program.
—When the
programmed time has
come, the unit will
automatically start
transmission.
Notes:
• If there is no answer or the tine is busy, the unit will automatically redial the number (see item 7 on
page 75).
• You can receive, transmit and copy documents while the delayed transmission is set. To copy or transmit
documents, remove documents from the tray and replace them when you have finished.
• If the programmed start time has passed during a power failure, delayed transmission will be attempted
soon after the power is restored.
• When polling transmission feature (see page 41) is set to ON, this feature is not available.
42