Panasonic KX-F700 - Manual (Page 53)

Advanced Instructions
TONE, FLASH and PAUSE Buttons
TONE button
________________________________________
The TONE (*) button is used when your tine has a rotary pulse dial
service. Pressing the button allows you to change temporarily from pulse to
tone mode during a dialing operation.
When you hang up, the unit will automatically return to pulse mode.
Note:
•
TONE can be stored into a phone number for automatic dialing.
FLASH button
The FLASH button functions as the hookswitch on a regular phone. If you
misdial or dial another phone number, press the FLASH button firmly. The
call will be terminated and you wilt hear dial tone. You can then dial the next
phone number.
Also pressing the FLASH button allows you to use special features of the
host exchange (if connected) or local telephone company services.
For further details, contact the supplier or your local telephone companies.
Note:
• FLASH can be stored into a phone number for automatic dialing.
PAUSE button
Pressing the REDIAL/PAUSE button causes a dialing delay in the dialing
sequence.
Example-1: When your unit is connected to a host exchange, insert a
pause as follows to get an outside line.
PAUSE Phone number
'------Line access number
Example-2: If a transmission error occurs frequently when making an
overseas transmission, add two pauses at the end of the
phone number.
Note:
• PAUSE can be stored into a phone number for automatic dialing.
53