Brookfield R/S Coaxial Cylinder Rheometer - Manual (Page 24)

Brookfi eld Engineering Labs., Inc. Page 24 Manual No. M08-219-B1211
Measurement
Open the bayonet lock and lower the plane-table. Apply the sample to be tested. Lift up the plane-
table and fi x the bayonet lock. Now, the measurement can start.
Remove excess sample from around the cone or plate before starting the
measurement.
If temperature control is required, a bath/circulator must be connected. The bath must be set at
the desired temperature, and you should wait until the bath and cone/plate accessory have reached
test temperature.