Brookfield R/S Coaxial Cylinder Rheometer - Manual (Page 45)

Brookfi eld Engineering Labs., Inc. Page 45 Manual No. M08-219-B1211
VI.6.7 Utilities
→ Measure Temperature
This function displays the temperature with the temperature sensor connected to the rheometer.
After initiating this function, the temperature is measured continuously:
Temperature:
20.5°C
<OK>=return
Push the OK key to return to the Utilities menu.
VI.7 Menu Entries of the Confi guration Menu
The confi guration menu allows the user to set parameters on the rheometer.
The entries:
Set output-mode: Defi nes if data is output to a printer or to the serial interface
during measurement.
Set meascount mode: Defi nes whether the measurement counter MEASCOUNT is
reset daily or not.
Set meascount=0: Resets the MEASCOUNT counter to 0.
Set time/date: Inputs date and time.
RS232 parameters: Sets data transfer parameters of the serial interface RS232.
Language: Selects language for user prompts.
Service: For service personnel only
Service 2: For service personnel only
These functions are explained in more detail in the following sections.
VI.7.1 Confi guration
→ Set Output Mode
This function defi nes the output device (printer, serial interface) which will receive the results.
This setting is independent of the internal memory in the rheometer for data storage. When tests
are run, the data is automatically stored in memory in addition to being sent to the confi gured
output device.
After selecting this function, you are prompted to select an output device:
Select output-mode:
-No output-device
-Printer
-RS232
Internal memory only
Additional output
to serial interface
Additional output to
printer
•
•
•
•
•
•
•
•