ChemoMetec SP-100 - Manual (Page 19)

1 Installation
9
Highlight the “nucleo Device” as shown in figure 12 and option-click it using the right
mouse button. This activates a pop-up menu. Select the “Uninstall…” function and the
USB device driver will be removed from the system.
1.3.2 Removal of SemenView TM - Windows 2000
To remove the SemenView software 3 , open the SemenView folder (Figure 13). The
folder should be located in the root directory of the local hard disk (C:\SemenView) if
the location was not changed during the installation.
Figure 13 Contents of the SemenView folder.
In the SemenView folder double-click on “uninst.exe” and confirm that the SemenView
software is to be uninstalled. During this un-install process you will see the following
dialogue boxes (hit the Yes button on both)
Figure 14 a and b Dialogue boxes during the un-install process.
3 In order to remove the program correct, first quit the NC Receiver.exe program if it is
running.