ChemoMetec SP-100 - Manual (Page 20)

1 Installation
10
The SemenView software and LabVIEW application will then be removed from your
computer. Any saved data will remain on the computer.
1.4 Upgrade the SemenView software
For upgrading the SemenView software the previously installed version must be
removed before the new version can be installed. Follow the directions from 1.3.2
Removal of SemenView
TM - Windows 2000.
The uninstall procedure will not interfere with previously stored data. However the
language selection will be reset to “English”.
Follow the directions from 1.2 Installation of SemenView TM – Windows 2000. Please note
that during the installation, the LabVIEW Run-Time Engine must be modified, therefore
Figure 7 Start-up dialogue for installation of the LabVIEW application, will be replaced
by the dialogue box below.
Figure 15 Dialogue box for modification of the LabVIEW Run-Time Engine.
From this dialogue box until successful installation click “Next” and finally “Finish”. Your
SemenView application is now upgraded. Please remember to select the correct
language for your purpose.