ChemoMetec SP-100 - Manual (Page 34)

5 Utility tab
24
Figure 34 Select a text editor
If WordPad is highlighted in the text editor list box it must be located on the hard disk.
This will be prompted (Figure 35) for the first time a report will be printed. SemenView
knows the location of Notepad. If the location of WordPad is prompted for then follow
the directions below to locate its position. SemenView will remember the information of
WordPad's location.
Figure 35 Locate WordPad
1. The dialogue shown in figure 36 appears. Locate “wordpad.exe”, highlight it
(using the mouse) and press Open.
Either WordPad or Notepad 6 can be configured as text editors. Therefore, if it is
not possible to locate “wordpad.exe”, then:
a. Select Cancel from Figure 36, press OK when the message box "Printing
Report" appears.
b. Then select Notepad from the text editor list box and press the Print
button again.
6 Before Notepad can be selected as text editor the field “Files of type:” must be
changed to “All files (*.*)”.