ChemoMetec SP-100 - Manual (Page 28)

4 Analysis tab
18
Figure 23 The file list made of filename and analysis result.
It is possible to browse through files or results from the active session. To select and
view a file from the list use the mouse or the arrow keys on the keyboard. The selected
file will be displayed including all data.
To browse files from other sessions, follow the directions below.
1. Click the “Folder…” button. This activates a dialogue where another session,
which is to become the active session, can be located.
2. Use the mouse to double click on the session or highlight it and click “Open”.
3. Click “Select Cur Dir” and the session will be displayed in SemenView. The files
will appear in the file list 4 and it is possible to browse through them using the
mouse.
The selection of a session from a previous date does not affect the transmission of data
from the NucleoCounter SP-100. If the active session is not the session of the day when
data is received from the NucleoCounter SP-100 then SemenView detects this and
changes the active session to the session of the day, displaying the most recent results.
In case you use SemenView during midnight, the date changes and this will
automatically generate a new folder for the data files.
In the folder text field (see Figure 22) you can easily key in the name of the folder. E.g.
you can easily go back to the folder from the 6
th of June 2003 if you change 030607 to
030606 using the keyboard (remember to hit the enter key on the keyboard).
4.7 Viability
The Calculate Viability check-button is presented (see Figure 24) when a file from a
Non-viable analysis is selected from the file list (see Figure 25). Once the button is
4 By default the newest file (highest "nnn" in the filename) has focus. This will be the
file at the end of the file list.