Compex Runner - Manual (Page 22)

20
English
Statistics
Your stimulator includes a statistics menu
that allows you to view in real time the
important information for a programme.
To access the statistics screen, you must
put the stimulator into the “Pause” mode or
wait for the end of the programme.
fig. 9 For programmes inducing muscular
contractions, the indication “MAX” shows
the maximum energy level reached per
channel during contraction phases. “AVG”
indicates the average stimulation energy
level used by the different channels during
the contraction phase.
fig. 10 In low frequency programmes, the
m i
- RANGE function, symbolised by a single
square bracket shows what percentage of
stimulation time was spent in the optimal
energy range.
9e-10e Press the channel 4 +/- button to
resume the programme at the point where
it was interrupted.
End of programme
At the end of each session, a small flag will
be displayed on the screen and a short
melody will be played. To switch off the
stimulator, press the on/off button.
Depending on the programmes, usage
statistics may be displayed (cf. fig. 9 and 10).
It should be noted, however, that statistics
are not available for all programmes.