Trig lock clear, Track trig edit menu, Trigs – Elektron Octatrack User Manual
Page 100
PATTERNS
88
Press and hold the trig you want to copy and press the [REC] key. A window saying “COPY
TRIG” will appear. Hold the [TRIG] key corresponding to the location you want to paste the
trig to and press the [STOP] key to complete the paste operation. A window showing
“PASTE TRIG” will be shown.
TRIG LOCK CLEAR
Instead of removing parameter locks one by one from a trig you can use the clear trig locks
command. First make sure you are in GRID RECORDING mode. If not, press [REC].
Hold and press the [TRIG] key of the trig whose content you want to clear. Then press
[PLAY] to clear the trig. The message “CLEAR TRIG LOCKS” will appear.
The trig lock clear operation can be undone by performing the operation one more time.
The message “UNDO TRIG” will be shown in the display.
TRACK TRIG EDIT MENU
This menu is opened by pressing [FUNCTION] + [BANK] when the GRID RECORDING
mode is active. The TRACK TRIG EDIT menu offers both an overview of all the trigs
belonging to the selected track and the possibility to place a wide variety of trigs on the
sequencer. The visible trigs belong to the currently selected pattern page. Toggle between
the pages by pressing the [PATTERN PAGE] key. If the track page consists of less than 16
steps, that will be reflected in the graphics of the menu.
•
It is possible to perform copy, paste and clear commands while the TRACK TRIG
EDIT menu is opened. Only trigs will be copied, no other settings.
•
The menu is available while in MIDI mode as well. When accessed from there the
trigs reflect trigs placed on the selected MIDI track. Slide and recorder trigs are
not available to MIDI tracks.
TRIGS
Shows the sample trigs, trigless locks, trigless trigs and one shot trigs of the active track
page and their location on the step sequencer. When this alternative is selected and the
[TRIG] keys or [FUNCTION] + [TRIG] keys are pressed, sample trigs, trigless locks, trig-
less trigs and one shot trigs can be placed on the sequencer. Trigless locks and trigless
trigs are indicated by shorter trig symbols.