Elektron Octatrack - Manual (Page 170)

Appendix B: EFFECTS REFERENCE B-5
2-10 STAGE PHASER
The phaser applies sweeping effects to sounds. It can also be used to make sounds appear wider.
PHASER MAIN
CNTR selects the center phase of the phase
modulation.
DEP sets the depth of the phase modulation.
SPD adjusts the speed of the phase depth
modulation.
FB controls the feedback of the original signal.
WID controls the stereo width of the affected
signal.
MIX adjusts the output between the original dry
signal and the phased signal.
PHASER SETUP
NUM selects the number of stages that should
be used.