Elektron Octatrack - Manual (Page 157)

SUMMARY OF BUTTON COMBINATIONS
145
[TRACK] + [EXIT/NO] will disarm any one shot recorder trigs of the track whose [TRACK]
key was pressed.
[TRACK] + [LEFT]/[RIGHT] will nudge the BPM of the sample of the track.
[TRACK PARAMETER] + [REC] will copy the parameter settings of a TRACK PARAME-
TER page.
[TRACK PARAMETER] + [STOP] will paste the copied parameter settings of a TRACK
PARAMETER page.
[TRACK PARAMETER] + [PLAY] will initialize the settings of a TRACK PARAMETER
page.
[SCENE] + [REC] will copy the assigned scene.
[SCENE] + [PLAY] will clear the assigned scene.
[SCENE] + [STOP] will paste a copied scene to the scene assigned to the scene slot.
[TRIG] + [ENTER/YES] will turn a trigless lock into a trigless trig.
[TRIG + [EXIT/NO] will turn a sample trig to a trigless trig. A trigless trig will be turned to a
trigless lock.
[TRIG] + [UP]/[DOWN] will, while in GRID RECORDING mode, open the SAMPLE LOCK
menu.
[TRIG] + [LEFT]/[RIGHT] will while in GRID RECORDING mode open the MICRO TIMING
menu.
[TRIG] + [REC] will copy the selected trig.
[TRIG] + [PLAY] will clear all parameter locks from the selected trig.
[TRIG] + [STOP] will paste a previously copied trig.