Elektron Octatrack - Manual (Page 53)

PROJECTS
41
PREROLL controls for how many bars the metronome will sound before the
sequencer starts playing. This setting only affects the start of the sequencer when
LIVE RECORDING mode is initiated.
CUE VOLUME controls the metronome volume sent to the cue outputs.
MAIN VOLUME controls the metronome volume sent to the main outputs.
TONAL will when active give the click track a tonal character. When deactivated the
click track will be constituted of short atonal impulses.
PITCH sets the pitch of the tonal click track. This setting is not available when
TONAL is deactivated.
MIDI
Here MIDI related settings are made.
CONTROL sets how the Octatrack handles certain MIDI messages.
AUDIO CC IN controls whether the audio tracks react to incoming MIDI CCs or not.
Enable or disable by pressing [ENTER/YES]. When disabled no CCs will affect the
audio tracks.
AUDIO CC OUT sets in what way the knobs used for audio tracks will transmit MIDI
CCs. This setting contains three options. Select between the options by pressing the
[LEFT] or [RIGHT] arrow keys or by pressing [ENTER/YES].
• INT will make the knobs affect only internal parameters. They will not send
out any MIDI CCs.
• EXT makes the knobs send out MIDI CCs but stops them from affecting
internal parameters. This option essentially makes the knobs work in a local
off mode.
• INT+EXT makes the knobs control both internal parameters and send out
MIDI CC data.
AUDIO NOTE IN controls whether incoming MIDI notes should affect audio tracks or
not. Enable or disable by pressing [ENTER/YES]. When disabled no incoming MIDI