Elektron Octatrack User Manual
Page 88
TRACKS
76
•
By enabling the STUDIO mode, the default main and cue output routing behavior
can be changed. STUDIO mode is handy when wanting to use the cue outputs as a
pair of assignable outputs. Read more about this mode on page 36.
•
If a cued track is muted it will only be audible from the cue outputs.
•
When the CUE MUTES TRACK setting, found in the PERSONALIZE menu, is acti-
vated a track being cued will be muted at the same. Read more in the section
“SYSTEM” on page 31.
•
The XLV, XVOL and XDIR parameters are available exclusively to scenes. They are
useful for avoiding dips in volume when doing fades between tracks or inputs.
Read more about these parameters in the section “SCENE VOLUME LOCKING” on
page 61.
•
The MIX parameter in the MIXER menu sets how much of the main and cue signals
that should be sent to the headphones output. Read more about the parameter in
the section “MIXER MENU” on page 44.