Spatializer, Spatializer main, Spatializer setup – Elektron Octatrack User Manual

Page 173: Spatializer main spatializer setup

Advertising
background image

B-8

Appendix B: EFFECTS REFERENCE

SPATIALIZER

The spatializer effect is suitable for affecting the stereo image in various ways, for example by widening
it. It is also capable of generating a psuedo-stereo image from a mono sample.

SPATIALIZER MAIN

INP adjusts the gain of the dry signal.

DPTH sets the depth of the widened signal.
The parameter works in conjunction with the
WDTH control.

WDTH sets the amount of stereo spread. The
parameter works in conjunction with the DPTH
control.

HP controls the cutoff frequency of the high
pass filter for the widened signal.

LP controls the cutoff frequency of the low
pass filter for the widened signal.

SEND adjusts the level of the widened signal.

SPATIALIZER SETUP

PHSE reverses the phase of the wet signal for:
none of the channels (NONE), the left channel
(L), the right channel (R) or both the left and
right channel (L,R).

M/S activates/deactivates the MG and SG con-
trols.

MG controls the amount of mid gain.

SG controls the amount of side gain.

Advertising
This manual is related to the following products: