AltiGen IP 805 - Manual (Page 11)

The IP 805 Phone
IP 805 User Manual 7
Figure 3. IP 805 Phone, Bottom View
Hardware Items in the Package
The following hardware items are included in this package:
• IP 805 set and stand
• Handset
• Handset cord
• AC adapter (Input: 100-240V; Output: DC 5V, 2A)
• Power cord
• Network cable
Supported Features
The IP 805 phone provides a wide range of call handling and dialing features directly on the phone and through
the MaxCS system.
• Auto Answer – You can configure your phone to ring for a specific number of seconds and then
automatically connect the call. While a call is ringing, you can still manually answer it. See page 13 for
details.
• Busy Lamp Field (BLF) – This feature must be configured by the system administrator. BLF associates
a programmable button with an extension that can be automatically dialed when selected; the button’s
light indicates that the extension is busy and blinks when ringing.
The BLF ring tone is played only when the phone is in idle state. It is stopped when the destination phone
stops ringing or the local phone exits idle state.
When multiple BLF extensions ring simultaneously, the IP phone will play the first BLF extension ringer
and beep tones and ignore other BLF extensions.
The BLF feature can be assigned only to internal extension numbers, not outside numbers.
This feature is not available in BASIC mode.
• Call Log – View a history of the most recent incoming calls (up to the last 99 calls). See page 20 for details.
Four slots for the phone stand