AltiGen IP 805 - Manual (Page 32)

Updating Firmware
28 IP 805 User Manual
IP Phone Boot Messages
The following messages may appear in the LCD screen when booting the phone:
Updating Firmware
Periodically, AltiGen may send out notifications of updated firmware for your phone.
To update your phone’s firmware,
1. Download the file containing the updated firmware from AltiGen. Save it on your local computer.
2. On your IP 805 phone, choose Menu > Network > Local address. Write down the IP address shown.
3. In your internet browser, enter the phone’s IP address (for example, http://10.30.10.130) . The phone’s
web-based configuration tool will open to the login page.
INVALID IP!
INPUT AGAIN...
The IP address that you entered is invalid.
INVALID VAL!
During registration of the IP extension, an invalid response (return value) was
received from phone server.
NO IP ADDR! The phone cannot attach to an IP address due to network failure.
No Network! The phone has lost the Ethernet connection.
REGISTER FAIL! The phone cannot register to the AltiGen phone server.
REGISTER OKAY! The IP extension registered successfully.
REGISTERING... You entered #27 to manually register the IP extension.
REMOVE OLD EXT.
When you enter #27, the extension/password configuration in the IP phone is
removed.
WRONG PASSWORD! The registration process failed because of an invalid extension password.
Message Explanation
Boot Done The phone successfully booted.
CHECK FW Checking firmware.
CHECK MEMORY Checking memory.
INIT NETWORK Initializing network.
LOAD FAILED Failure to load the image into memory.
LOADING FW... Loading firmware.
LOADING NOW Loading firmware.
NETWORK FAILED. The network initialization process failed.
TFTP FAIL! Failure downloading TFTP.
UPDATE FAILED. Firmware update failed.
UPDATE OK Firmware update successful.
update APP(S1)
When Boot Download is set to TRUE, the phone will show this message when it is
rebooted.
Message Explanation