AltiGen IP 805 - Manual (Page 25)

User Guide
IP 805 User Manual 21
Hold*
When Multiple Call Waiting is enabled at the extension, you can place multiple incoming
calls on hold and retrieve them using the phone’s / buttons and the
button.
Pressing Hold while onhook will retrieve the last call that you placed on hold.
You can place up to 9 calls on hold at a time.
During a call:
1) Press the Hold button to put the current call on hold and make a new call.
To retrieve a single call on hold:
1) Press the Hold button.
To retrieve multiple calls on hold:
1) Use / to select a hold call to be retrieved.
2) Press .
OR
Press the Hold button to retrieve the last hold call.
Intercom * Press Intercom to call an internal extension.
Line Park
A parked call line appearance can be assigned as a programmable Line Park key by the
administrator.
While connected to a caller, the call can be parked by pressing the Line Park button.
While a call is parked at a Line Park line, the button’s light will be on. The call can be picked
up by pressing the Line Park button.
When configured by the administrator, the IP phone can play an audible beep or one of
several different ring tones when a call is parked.
1) Press #51 and then enter the 2-digit Line Park line, or press the Line Park button (if the
administrator has configured one).
2) The light on the button turns off when you pick up the parked call, when the caller hangs
up, or when the call is routed to voicemail.
Mute
While on a call with speaker, handset, or headset on:
1) Press the Mute button.
2) To disengage mute, press the Mute button again.
Program Key
1) Press the Menu button.
2) Select PHONE SETTING, then PROGRAM KEYS, then the desired program key.
3) Enter the appropriate digits for the speed dial number or feature code.
Reboot 1) Press * * 3, then
Redial
Redials a selected number from the last 16 calls; redials up to 32 digits.
When a new call comes in, the phone will exit this menu and go to ring state. If in this menu
for longer than 20 seconds without any input, the phone exits this menu.
Phone is onhook:
1) Press the Redial button.
2) Use / to scroll to the desired entry. ( scrolls to previous entry, scrolls to first
entry.)
3) Press the Speaker button, raise the handset, or press to dial the selected number.
Function Key Sequence