AltiGen IP 805 - Manual (Page 17)

IP 805 User Manual 13
C H A P T E R 3
Configuring the IP 805 Phone
Phone, system, and network settings can be configured through the IP phone’s menu. The phone can also be
registered through this menu, if necessary.
• To get to the menu, press the Menu button.
• / buttons scroll the menus and settings in the LCD screen.
•  button selects a menu item or a setting.
• The button selects a menu item or a setting.
• Pressing the Menu button again returns you to the previous menu.
• Press the Release button to exit the menu.
The following tables describe each setting and the corresponding menu path.
Important: Your IP 805 phone should be in normal operating mode when you configure it. If your IP phone
is in BASIC mode (shown in the LCD display), your changes will be overwritten by MAXCS
Administrator settings when the phone is successfully registered.
Phone Settings
Setting Menu Path Description
Extension
Number
Phone Setting > Ext Number Sets the IP phone’s extension number.
Extension
Password
Phone Setting > Ext Password Sets the IP phone’s extension password.
Program Keys
Phone Setting > Program Keys >
Program Key [#] Sets the speed dial number or feature code for
a selected key.
Ring Tone Phone Setting > Ring Tones
Sets the desired ring tone.
Custom ring tones are not supported.
Ring
Download
Phone Setting > Ring Download Downloads ring tones from the server.
Auto Answer Phone Setting > Auto Answer Sets whether to enable automatic answering.
Auto Answer
Ring
Phone Setting > Auto Ans Ring
Sets how many seconds the phone should ring
before it is automatically answered (1-20
seconds).
This setting appears on the menu only when
Auto Answer is set to Yes.
Auto Answer
Device
Phone Setting > Auto Ans Dev
Sets whether speaker or headset is the
automatic answering device.
This setting appears on the menu only when
Auto Answer is set to Yes.