AltiGen IP 805 - Manual (Page 20)

Setting the Ring Tone
16 IP 805 User Manual
7. Once the IP phone is rebooted, all LED lights come on for a brief time.
8. The LCD screen displays [BOOTING] on the first line.
9. On the second line of the LCD screen, the following messages are displayed in succession:
—CHECK MEMORY (RAM checking state)
—CHECK FW (Firmware checking state)
—INIT NETWORK
—LOADING FW...
—LOADING NOW.
—Boot Done
—INITIALIZING
—Version xxxx.xxxx.xxxx
10. You may display the version of firmware at any time: Press the Menu button, scroll to SYSTEM and press
, scroll to Version Info and press .
Note: An article that describes how to update IP805 firmware via TFTP can be found in the AltiGen Knowl-
edge Base.
Setting the Ring Tone
To set the ring tone:
1. Press the Menu button, select PHONE SETTING, and then press .
2. Scroll to RING TONES and press .
3. Scroll to the desired ring tone and press .
Downloading Ring tones
When new ring tones are added to the server, they can be downloaded. To download ring tones:
1. Press the Menu button, select PHONE SETTING, and then press .
2. Scroll to RING DOWNLOAD and press .
3. Select YES and press .
4. Press the Menu button twice to close all menus.
5. Reboot the phone by pressing * * 3 and the button.
Note: Custom ring tones are not supported.
Distinctive Ringing Support
If the Distinctive Ring options are enabled by the system administrator, you may have three different ring
cadences that distinguish the types of calls:
• Internal call = 1 ring
• External call = 2 rings
• Operator call = 3 rings
Workgroup Status Display
The IP phone can display workgroup status, if your system administrator configured this feature for your
phone. To enable this, administrators select the Display Workgroup Status check box in the AltiGen IP
Phone Configuration Page in MAXCS Administrator.