Clarity INT9 - Manual (Page 13)

3 Installation Clarity Hardware
Control Modules dialog.
l
You can specify the searching filter to simplify the finding of the driver.
l
Select the INT9 and press the Add… button.
The DataApex INT9 Setup dialog will appear.
Fig 5: DataApex INT9 Setup
l
Enter the detector names in Name fields for individual channels, set signal
units.
Note: A detailed description of this dialog can be found in the chapter
"DataApex INT9 Setup" on pg 13.
l
Press the OK button.
The INT9 will appear in the Setup Control Modules list of the System
Configuration dialog.
l
Drag and drop the INT9 icon from the Setup Control Modules list on the
left side of the System Configuration dialog to the desired Instrument tab
on the right side (or use the button to do so).
- 9 -