Clarity INT9 - Manual (Page 29)

5 Troubleshooting Clarity Hardware
▌ The driver is installed, but there is a yellow exclamation mark (the Colibrick item in the
Fig 17 on pg 24.) or a question mark over its icon, or it is not behaving as expected.
The driver is probably installed incorrectly.
Solution:
Reinstall the driver manually as described in the chapter "Installation and
reinstallation in Windows 8, 7 or Vista" on pg 26.
▌ The item does appear, but is displayed with a cross symbol.
Solution: Double-click the item to invoke the General tab and activate the driver by clicking on
the Enable this device button.
▌ The item does appear and there are no error symbols around it. A driver for a different
type of Windows operating system was possibly installed thereby replacing the
correct driver.
Solution:
Uninstall the incorrect driver and install the correct one as described in the chapter
"Installation and reinstallation in Windows 8, 7 or Vista" on pg 26.
- 25 -