Clarity INT9 - Manual (Page 8)

INT9 A/D converter 3 Installation
3 Installation
Ensure that you have Administrator access rights in your Windows OS
before you proceed with the installation.
3.1 The INT9
l
Install Clarity software from the CDROM.
Caution: Install Clarity before inputting any devices.
The drivers were copied to your computer during the installation of the
Clarity software.
l
Plug in the HW Key (described in the Getting Started manual).
l
Turn off the PC.
l
Plug the INT9 card into the PCI slot.
l
Start the PC.
The drivers were installed automatically during the installation of the
Clarity software.
l
The driver is now installed, proceed to setup and wiring.
Note: When installing multiple INT9 cards, a PC restart is recommended after
the installation in order to prevent the reassignment of INT9 acquisition
channels between Clarity Instruments.
3.2 Standard cable for Clarity station
Fig 2: Cables for the Clarity station package
The standard Clarity station package with INT9 card includes a cable
composed of signal and starting cables for connecting the Clarity station
via the INT9 card to the chromatograph. The number of signal wires,
starting wires and digital output wires present corresponds to the number
of signals the INT9 card has - each signal on the card is accompanied by
- 4 -