Clarity INT9 User Manual
Page 40
Advertising
INT9 A/D converter
5 Troubleshooting
Fig 36: Step 5 of Add/Remove Hardware Wizard
l
Set the path to the correct drivers. These drivers can be found in the
directory where Clarity is installed (C:\CLARITY by default), in the HW_
DRIVERS\INT9 subfolder. Then click the OK button.
Fig 37: Step 6 of Add/Remove Hardware Wizard
l
In the Models list select the "DataApex Acquisition device, Model 9.XX"
and click the Next button.
l
In the remaining dialogs press the Next button.
l
Restart the PC.
l
Re-check the driver in the
Device Manager
as described in the chapter
"Reinstallation of drivers in Windows 2000" on pg 33.
- 36 -
Advertising