Clarity INT9 - Manual (Page 44)

INT9 A/D converter 6 Tables and Specifications
6 Tables and Specifications
6.1 Description of the INT7 connector (Male)
Fig 43: Connector pins
Tab 4: Description of the connector pins:
Pin Description
1H + Input of the 1st channel
1L - Input of the 1st channel
AGND Ground of the analog channels
IN1
Digital input (of the 1st channel). Used as an External Start (marker) of
the 1st channel.
OUT1
1st Digital output. Digital outputs are controlled by Event Table , ACTIVE
sequence and Digital outputs of INT9 dialog.
DGND Ground of the digital inputs and outputs.
OUT1S1
OUT1S2 Digital outputs - 1st relay contact. Contact is closed when output is at a
LOW level.
- 40 -