Brother WP330MDS - Manual (Page 118)

/f CODE + EXPR is pressed when the carrier is on the left margin or on the left
end, the typewriter will beep.
Pressing CODE + EXPR moves the cursor to beginning of the line in the display
mode.
Subscripts and Superscripts
'' CODE
--4
1 CODE
1
------ ■ d J
+
MENU
POP
------
CANCEL
PDOWN,
■----^
To type subscripts, press CODE + P UP. In the type mode, this will move the paper up
1/12 inch, and in the l_/L mode, will move the cursor to the lower portion of the line on
the screen being typed. All the characters you type from now on will be printed lower
than the previous characters. To cancel this function, press CODE + P DOWN.
Superscripts are created similarly, except that you have to start with CODE + P DOWN
and cancel with CODE + P UP.
NOTE:
If either CODE + P UP or CODE
+
P DOWN are pressed twice in a row in type
mode, the auto correction function will be disabled. If this is done in the UL mode
after the data has been input, a beep will sound.
Accents and Special Symbols ("Dead" Keys)
The multilingual keyboard supports the characters with accent marks ot such
languages as French, German, and Spanish, as well as special symbols.
1
.
2 .
3.
4.
Switch the KB indicator to II (International) or III (Symbol) using CODE + K (KB).
(See “Changing the Keyboard” on page 105.)
Install the appropriate print wheel. (See “Changing Daisy Wheel Cassette” on
page 289.)
Type the dead character. (See “Character Keys” on page 264.)
Type the base character.
NOTE:
In display mode, the dead character and the base character are displayed side by
side (Example: ^a).
108