Diskettes, Note, Inserting and removing a diskette – Brother WP330MDS User Manual

Page 25: Caring for your diskettes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Diskettes

This word processor accepts only the following types of 3.5-inch diskettes:

MF-2DD (Double Sided/Double Density/Double Track)

MF-2HD (Double Sided/High Density/Double Track)

NOTE:

Your word processor recognizes both the “2DD” and “2HD’’ type diskettes. It will

format the “2DD” diskettes to a DOS 720KB format and the “2HD” diskettes to a
DOS 1.44 MB format. It is recommended that you use Brother brand diskettes.

Inserting and Removing a Diskette

Insert the diskette as shown in the illustration.

To remove the diskette, press the eject button.

CAUTION

— The diskette may be inserted and

removed when the power is either on or off. It

may also be left in the drive while transporting the

word processor. However, you should never

insert or remove it while a message indicates

that

a diskette

operation is in progress.

Caring for Your Diskettes

The sensitive material where the data

is

actually stored is very similar to the

magnetic material used to make common cassette tapes. When a tape is damaged,

this results in terrible background noises, but you can still hear some music. The

slightest damage, such as a scratch, or a small amount of dust on the sensitive

material, however, can easily spoil an entire file and

make it

unusable. The protective

case of the 3.5-inch diskettes protects the sensitive disk surface. (The metallic

shutter automatically opens and exposes this sensitive surface only when the

diskette is inserted into the drive.) Additional precautions must be taken in order to

ensure reliable maintenance of your files.

15

Advertising