Brother WP330MDS - Manual (Page 89)

The default values for STARTING PAGE, ENDING PAGE, and NUMBER OF
COPIES are displayed each time the print menu screen is called up.
4. Move the cursor with T and i to any values you would like to change, and
change using SPACE BAR for YES/NO setting, or by typing the desired value for
the other options.
5. Insert a sheet of paper and press RETURN.
NOTES:
* Press CANCEL at any time to terminate selection and return to the WP INDEX
screen.
* If there is a wrong setting, the following message appears and you have to
correct it to the right setting.
NOTE:
Incorrect setting.
NOTE:
An error will occur if the setting for STARTING PAGE is greater than the last page
of the document.
Incorrect page number. Press CANCEL to exit
6. If this is the first time you are printing the file, or you have previously printed a file
using a different pitch, you will be prompted to install the proper daisy wheel to
match the pitch setting selected. Insert the correct wheel, if necessary, and press
RETURN. As soon as printing starts, the following message is displayed:
Printing. Press SPACE to pause.
Pausing/Resuming Printing
fT
(SPACEBAR)
Sometimes you may wish to temporarily interrupt printing - to adjust the paper
position, for example.
1. Press SPACE BAR to stop the printer. A message indicating that the printer is
paused will be displayed.
Printing paused. Press SPACE to continue.
2. Press SPACE BAR to restart the printer. The above message reappears:
Printing. Press SPACE to pause.
79